This works with all SF and NXT grip frames. Available in silver or black, in long length (stock grips) or short length (Hybrid grips).
These screws use a phillips-head screwdriver to remove and install.

Replacement screws used on Shocker NXT eye covers. These screws are made from alloy steel to provide the best protection against allen hex stripping. These screws can still be stripped out; please avoid overtightening the screws in your marker!

These screws are the same thread as used on Shocker SFT eye covers, but are shorter length. These are ONLY to be used with Shocker SFT bodies that have been properly-modified to use NXT beam-break eyes. Any Shocker SFT markers that have been modified by Nummech or ZDSPB will use these eye screws.

This screw locks the trigger rest component in place within the frame. Note this is the same as the grip panel screws

Replacement frame screw used on a Shocker NXT. Note this is the same as the frame screw for some Private Label Shocker SFT frames.

Replacement solenoid manifold screws; these screws hold the manifold to the Shocker body. Please note Nerves do NOT use the same screws for their manifolds.

These are the tiny set screws used to seal the internal air passages on the bottom of Shocker bodies (there are four of them total). Replacements are useful if you lose one or more screws for your gun and need to replace it/them.
These are high quality black oxide set screws. Regular steel or stainless screws won't work.

This is a special allen wrench that is slightly oversized so it will fit as snugly as possible inside hex screw heads. This allows for the most torque to be applied to the screw and helps to avoid stripping them out. I suggest using one of these if you plan on removing the body set screws from your Shocker body, to disassemble it for anodizing or thorough cleaning. These allen wrenches have an extra long shape to allow for maximum leverage.

Replacement vertical adapter screw for a Shocker SFT, Nerve, or Shocker NXT. This will function with all vertical adapters currently available.

Replacement set screw for the side of the Shocker and Nerve vertical Max-Flo.

Replacement set screw for the inside of the reg endcap (hidden within the oval hole in the reg housing), this prevents the endcap from being unscrewed too far.

Lock screw for the Shocker NXT frame's integrated dovetail rail.

These bumpers are laser-cut from an abrasion resistant silicon rubber material and can be utilized with most Shocker bolts. The hardness is equal to the factory bumpers.
Compatibility: these bumpers are compatible with all types of bolt guides, except for the NDZ adjustable bolt guides which use a large plastic disk. Do not use with NDZ adjustable bolt guide.
(Replacement for Smart Parts #BUM004)

These bumpers are laser-cut from white nylon material and are meant to be used with Shocker bolts that travel faster than the stock bolts. Examples of "fast" bolts include the Lurker Eigenbolt and Pooty v1 bolts. These bumpers are harder compared to the factory bumpers, which lets them last for a longer period of time. If your Shocker has experienced bumper shredding problems from regular use, this hard bumper will solve the problem.
Installation: the bumper has a small cut which allows it to slide around the bolt guide's base. The cut is difficult to see in the picture because of the white background. Do not be alarmed if you see a "split" in your bumper when you receive it - this is normal.
Compatibility: these bumpers are compatible with all types of bolt guides, except for the NDZ adjustable bolt guides which use a large plastic disk. Do not use with NDZ adjustable bolt guide.
(Replacement for Smart Parts #BUM004)