Nerve screws/hardware
Most of the screws used in a Nerve are listed here. Many Nerve screws are shared with Shocker SFTs.
Grip panel screw
$0.75 each
This works with the stock frame, Punishers frame, and most others. Not compatible with Element Ion frames. Available in silver or black, in long length (stock grips) or short length (Hybrid grips).
These screws use a phillips-head screwdriver to remove and install.
These screws use a phillips-head screwdriver to remove and install.
Nerve/NXT rear frame screw
$0.99 each
Replacement rear frame screw for a stock Nerve frame. This will also work with a Shocker Tonton, Dark, 06 Dynasty frame, or any Shocker NXT frame.
Nerve front/long frame screw
$1.49 each
Replacement front frame screw used on Nerves. This is also the frame screw used on standard Shocker frames (not private label).
These screws are custom made which leads to the higher price.
These screws are custom made which leads to the higher price.
Reflective vision eye screw
$0.75 each
Replacement Vision eye ribbon screw; this screw is used on a Shocker SFT, Impulse, and Nerve.
Solenoid manifold screw
$0.75 each
Replacement solenoid manifold screws; these screws hold the manifold to the Nerve body. Please note Shockers use different screws for their manifolds.
Solenoid spacer screw
$2.99 each
Out of stock
Out of stock
This long screw holds the solenoid to the solenoid manifold. This will work on the Nerve stock solenoid manifold, or the NDZ stainless version.
Trigger rest plate screw
$0.75 each
Replacement screw to hold the trigger rest plate within the top of the frame. This is also used on a Shocker Tonton or Dark frame. Note this is the same as the grip panel screw.
LPR lock screw
$0.99 each
Replacement tournament lock set screw for use with the Nerve and Mini-Flo LPR adjustment knob. Available in silver or black.
LPR bearing ball
$0.49 each
This metal ball is placed between the LPR spring and piston (drop it into the LPR before reinstalling the spring/endcap). Its prupose is to help stabalize the LPR's output when adjusting it, by providing a buffer between the spring and piston. The bearing became a factory part on Nerves in early 2005 so any marker assembled prior to that likely never had this installed.
SFT vertical adapter screw
$0.99 each
Replacement vertical adapter screw for a Shocker or Nerve. This will function with all vertical adapters currently available.
SFT vertical adapter lock washer
$0.49 each
This lock washer is required to space out the vertical adapter screw with the adapter itself. This is needed for all vertical adapters currently available.
Regulator set screw
$0.75 each
Replacement set screw for the side of the Shocker and Nerve vertical Max-Flo.
Board/microswitch pin
$2.49 each
Out of stock
Out of stock
Replacement pins that hold the board in place within the frame.
These pins are custom made which leads to the higher price.
These pins are custom made which leads to the higher price.
SFT Powerswitch actuator pin
$0.99 each
Replacement pin that holds the transparent powerswitch actuator button inside the frame.
SFT vertical adapter pin
$0.99 each
Replacement pin that prevents the vertical adapter from swiveling around.
Shipping policies and contact information can be found on the Store mainpage.