Ion screws/hardware

These screws are mainly for stock Ions however most are also compatible with aftermarket parts.

Grip panel screw
$0.75 each
Color:
Length:
6-32 thread grip panel screw
6-32 thread grip panel screw
This works with the stock frame, Punishers frame, and most others. Not compatible with Element Ion frames. Available in silver or black, in long length (stock grips) or short length (Hybrid grips).
These screws use a phillips-head screwdriver to remove and install.

Element frame grip panel screw
$0.75 each
Element frame grip panel screw
Element frame grip panel screw
This screw is used with the Element Ion frames. This screw is long so it will work only with thick grips (no hybrid).

Frame screw
$0.99 each
Color:
Ion frame screw
Ion frame screw
Replacement Ion frame screws, available in silver or black. This screw will work with all current Ion frames however it won't accomidate any bolt-on snatchgrips such as those made by NDZ.

Breech screw
$0.99 each
Ion breech screw
Ion breech screw
Replacement breech screw for the Ion breech section. Works with all current Ion frames and breech sections.

Frame magnet set screw
$0.99 each
Ion frame magnet set screw
Ion frame magnet set screw
Replacement magnet / pre-travel stop set screw for stock Ion frames.

Regulator spring platform set screw
$0.75 each
Ion/NXT regulator spring platform set screw
Ion/NXT regulator spring platform set screw
Replacement set screw for the side of the Ion or NXT stock vertical reg. This screw locks the spring platform in position.

Regulator endcap safety screw
$0.75 each
Ion/NXT regulator endcap safety screw
Ion/NXT regulator endcap safety screw
Replacement set screw for the inside of the reg endcap (hidden within the oval hole in the reg housing), this prevents the endcap from being unscrewed too far.

Shipping policies and contact information can be found on the Store mainpage.